Underground Ernie - electric model trains

These are all brand new boxed models made by Bachmann.
The chassis & motor bogies are ideal for all manner of model rail & tram projects.

Each features a superb smooth running motor & all are DCC ready - just plug your DCC chip into the fitted circuit board. 
They will operate on normal 00 or HO track using a conventional 12v DC power supply.

back to home page


Image
(click for full size)

Ref. no.

Purchase Description GBP £

ue206_1.jpg (89405 bytes)

Ernie_in_bits.jpg (337177 bytes)

Ernie_in_bits_1.jpg (45086 bytes)

UE206
'Ernie 1' Inspection Vehicle electric train motorised

Wheel diameter: 10.5mm
Bogie wheelbase: 25mm


Circuit board attached with an 8 pin DCC ready board plugged in. 

The switch turns the white LED headlamp unit on and off.

This unit provides a really cost effective item of motive power for 016.5 narrow gauge modellers

£21.99 
+ £2.50 UK P&P
UE_Hammersmith_City.jpg (15877 bytes)

UE_Jubilee.jpg (239583 bytes)

ernie_chassis.jpg (82674 bytes)

UE200
Underground Ernie - 2 car set
1 motorised car + 1 non-motorised car

Select from:

Jubilee/Hammersmith & City/Circle/Jubilee/Brooklyn

Bogie wheelbase: 24mm
Wheel diameter: 10.5mm
Bogie centres: 69mm

Features a central motor which drives the gears via a cardan shaft (under 10mm long but easily extendable) that turns a non-swiveling large brass worm. This is coarse enough to drive the swiveling gears built into the bogie. There is a small circuit board attached with an 8 pin DCC board plugged in. All the wheels collect electricity using a split frame system.

Running is smooth and top speed isn't very high. The bogie components are basically the same for both the powered and un-powered bogies. There is a mechanism to make the eyes swivel which is driven off the top of the worm.

£20
+ £2.50 UK P&P
     

 

 

Please contact us for details of non UK postage rates.

back to home page